ASA MRRF

$16.00
$16.00
Ask a question Share

ASA MRRF

$16.00
$16.00

Application

Action figures

Action figures often include tons of small features. Printing them with PLA is easy at almost any scale

Jewelry

PLA is perfect for printing small and detailed objects, such as jewelry. Whether it’s a necklace or an earring, you can expect clean edges and no stringing, especially if coupled with a smaller nozzle.

Large prints

Thanks to its minimal thermal expansion, PLA is a great choice for large prints. No warping, no layer separation. Use your build volume to its maximum potential!

Details

Printing difficulty
Easy
Temperature resistance
55 °C
Toughness
Average
Susceptibility to warping
None
Odor
No odor
Post processing
Difficult
Wet sanding
Solubility
Very difficult
In dangerous chemicals
Elasticity
None
Print speed
Fast
Details
Under 0.2 mm
Abrasivity
None
Hard to break
No

Recommended Printing Settings

Bed Temperature: 40–60 °C
Heated Bed Optional
Enclosure not required
Print Surface PEI
Glass plate
Painter’s tape
Glue stick
Extruder Temperature: 210 ± 10 °C
No special hot-end required
Cooling Part Cooling Fan Required
Fan Speed: 100%

 

Support Article & Guide

Print guides Adamant S1

Print guide to get good results printing with our Adamant S1

#Adamant S1

Print guides Adamant S1

Print guide to get good results printing with our Adamant S1

#Adamant S1

Print guides Adamant S1

Print guide to get good results printing with our Adamant S1

#Adamant S1

Print guides Adamant S1

Print guide to get good results printing with our Adamant S1

#Adamant S1